Tag: instructions

Recover Android Phone Storage Using Temporary Root

by on Jan.30, 2011, under Posts

If you often encounter the dreaded “Phone storage is getting low” notification on your Android 2.2+ phone and have already tried using “Manage applications” (under “Menu” -> “Settings” -> “Applications“) and/or “App 2 SD” to remove apps, move apps on phone storage to the SD card, or cleared the cache, you can try the following procedure to move even more “phone-only” apps to your SD card.

I have used this to gain about 30MB of phone storage by moving huge apps such as iGO (17MB), Skype (4MB) and fring (3MB). Although some of these apps have not been configured/enabled by their developers to be installed on the SD card, the procedure overcomes this by using a powerful tool called Titanium Backup.

Not every app should be moved to the SD card. You should not move system or ROM apps such as GMail, Internet, or Youtube. Apps with widgets should be avoided as well, since the widgets will break on your home screens if you move them.

When you have Titanium Backup on your phone, it can also perform detailed backups of your apps and data and remove ROM or manufacturer-installed apps (aka bloatware). Another three apps below allow you to download and purchase apps from Market if you are in a country or with an operator with limited Market access.

Warning: please make a full backup of your phone before attempting this procedure. I am not responsible for any outcome resulting from this procedure.

Prerequisites:

  1. Android 2.2 (Froyo) or above phone
  2. VISIONary+ by MoDaCo (download link)
  3. Superuser by ChainsDD (download link)
  4. Titanium Backup by Joel Bourquard (download link)
  5. Market-Enabler by Andrea Baccega and Tim Strazzere (download link)

Procedure:

  1. Go to “Menu” -> “Settings” -> “Applications” -> “Development” and check/enable “USB debugging“.
  2. Download and install VISIONary+. Launch VISIONary+ and click “Temproot now“. The display will show an icon and some text indicating its progress and return back to the menu. Go back to your home screen.

    JPEG image 237x368

    VISIONary+

  3. Download and install Superuser. You may launch Superuser to look at its interface, but there’s nothing you need to do there at this point.

    JPEG image 320x457

    Superuser

  4. Download and install Titanium Backup. Launch Titanium Backup and Superuser will interrupt with the following screen (not the exact wording here, just an example). Tap “Allow” to grant Titanium Backup temporary superuser/root access.

    JPEG image 318x430

    Superuser in Titanium Backup

  5. Titanium Backup will now gather the list of apps installed on your phone (dialog will indicate “Building exact app size information“), which may take a few minutes to complete.
  6. Tap “Problems?” button at the bottom, and tap “Yes, do it“. This downloads an additional tool called busybox into Titanium Backup’s data.

    JPEG image 265x450

    Titanium Backup

  7. Note the amount of free phone storage just above the bottom row of buttons, labelled “Internal“. The next few steps should attempt to increase the free amount.
  8. Tap “Backup / Restore” button at the top, you will see the list of apps that you can backup, remove and other operations.
  9. For each app that you want to move to SD card, tap the app and tap “Move to SD card“. After a while, the app will be moved from your phone storage to the SD card. You can note the additional free space gained in Titanium Backup.
  10. Optional – If your Market is limited, download and install Market-Enabler. Tap “Settings list” on top and select one of the more popular (read US) operators to fake your phone to. Go back to Market and see if you can search for and download more/premium apps.

    JPEG image 320x569

    Market-Enabler

I managed to go from 9MB phone storage available to 40MB, which gives more space for data-intensive apps such as Google Maps, Google Reader, Internet and Opera Mini. Hope this helps you, enjoy!

Technorati Tags: , , , , , , , , ,

Share
Leave a Comment :, , , , , , , more...

HOWTO: D-Link DSL-520B Firmware Upgrade

by on Oct.08, 2010, under Posts

[JPEG image]

D-Link DSL-520B ADSL Modem

This is a post for folks who are using the D-Link DSL-520B ADSL modem. My user recently complained of performance lag and I decided to check for newer firmware. The currrent and shipped firmware version was 1.00. After resetting and updating the firmware to 1.22, my user reports a significant improvement.

 

 

If you were to download firmware 1.22 from D-Link, released 14 May 2010, and try to upgrade using the “Update Software” page of the modem’s administration, it may just tell you that the “image upload failed“. Googling for some help revealed a D-Link Indonesia blog with instructions to transfer to the firmware image via TFTP.

I’m re-writing the instructions from that blog with what works for me. Note that you need to have some skills in installing software and executing command line instructions.

Here we go:

  1. Download the DSL-520B firmware version 1.22 from here or direct from this blog in case I decide to buy D-Link and dissolve it, then extract the 2MB image file into a known path of your computer, say C:\.
  2. Download TFTP server software from here and install it.
  3. Turn off or disable all software firewalls and anti-virus software on your computer.
  4. Turn on the DSL-520B modem and plug the network cable between the Ethernet port and your computer. The default IP address of the modem should be 192.168.1.1.
  5. Manually set the IP of your computer to 192.168.1.99.
  6. Start TFTP and set its current directory to C:\.
  7. Ensure that the interface IP in TFTP is set to 192.168.1.99.
  8. Open a Windows command prompt window.
  9. Check that your computer is able to reach the modem by executing the command: “ping 192.168.1.1“. If not, repeat from step 4 or reset the modem.
  10. Execute the command: “telnet 192.168.1.1“. At the login prompt, enter the default username “admin” and password “admin“.
  11. Once logged in, enter the command: “tftp -g -f DSL-520B-SE_1.22_07202009_cfe_fs_kernel 192.168.1.99“. The image filename should be “DSL-520B-SE_1.22_07202009_cfe_fs_kernel“. This instructs the modem to download the image file and proceed to flash to the new version, which should take a few minutes to complete.
  12. There will be a new line in the command window to indicate that the firmware upgrade process is complete.
  13. Close the command window.
  14. Reset the modem to factory defaults.
  15. Open a web browser, enter the URL: http://192.168.1.1, login, and verify in the “Device Info” page that the firmware version is indeed 1.22.
  16. You may uninstall TFTP.

Technorati Tags: , , , , , , , , ,

Share
Leave a Comment :, , , , more...